How to avoid fiber optic patch cord damage during installation?

During the installation of Fiber Optic Jumper And Tail Fiber, it is crucial to protect the optical fiber from damage, as the fragility of the optical fiber may cause signal loss and performance degradation. In order to ensure that the fiber optic patch cord can remain intact during installation and provide stable performance, there are several key factors that require special attention.

Excessive bending is one of the main causes of fiber damage. During the installation of fiber optic patch cords, forced bending should be avoided. Generally, the minimum bending radius of the optical fiber is 10 times its diameter. When wiring, be particularly careful to avoid bending the fiber optic patch cord at too small an angle or excessive bending. Excessive bending can cause damage to the inner core of the optical fiber, which in turn affects the transmission quality of the optical signal. To better avoid such problems, you can use suitable support tools, such as bend protection devices, to ensure that the optical fiber always maintains a reasonable bending radius.

During the installation of fiber optic patch cords, excessive tension should not be applied to the optical fiber. Although the fiber optic patch cord is designed to be sturdy, it is still sensitive to external forces. Stretching or applying excessive pressure may damage the structure of the optical fiber, causing signal attenuation or complete interruption. Therefore, during installation, ensure that the tensile strength of the optical fiber is within the specified range and do not pull it too tight, especially when connecting different devices, to avoid the tension being concentrated on the fiber connection part.

During the installation process, it is crucial to use tools correctly. Professional fiber strippers, connector tools, and other fiber-related equipment can effectively avoid damage caused by improper operation or improper tools. Manual stripping or improper plugging and unplugging operations can easily cause fiber breakage or connector damage. Using specialized tools can ensure that each step of the operation is accurate and standardized, thereby reducing the risk of human damage.

Cleaning fiber jumpers is also a key link to ensure their good performance. Before installing the optical fiber, it is very important to ensure that the fiber end face is clean and dust-free. Even tiny dust or stains may affect the connection quality of the optical fiber and cause poor transmission of optical signals. During the installation of optical fiber, professional cleaning tools should be used to clean the end faces of the optical fiber and connectors, and avoid direct contact with the end faces with your hands to prevent stains and grease from affecting the connection quality.

Fiber jumpers also need to be stored and transported with special care. If the fiber jumper is not used for a long time, it should be stored in a dry, low-temperature environment away from strong magnetic fields. Avoid curling the fiber jumper too tightly and avoid strong external pressure or vibration. Good storage habits can not only protect the fiber jumper from damage during transportation, but also extend its service life.